|
|
|  |
G-910: GE Fanuc Series 90 Family Programmable Controllers/Level One
|
| Description |
This 36-hour course provides a thorough hands-on familiarization with the GE Fanuc Series 90-70 and 90-30 families of programmable controllers. The course is designed for technical personnel involved in the installation, troubleshooting and maintenance of GE Fanuc Series 90 Family programmable controller systems. |
| Topical Outline |
- Introduction to the GE Fanuc 90
- Family
- Hardware Familiarization: Central Processing Unit, Input/Output System
- Software & Hardware Configuration
- Memory Structure and Organization
- Troubleshooting Procedures: Hardware Troubleshooting, Software & Program Troubleshooting
- Instruction Familiarization: Relay Logic, Timers and Counters, Conversion Functions, Arithmetic and Compare, Control Functions
- Installation and Maintenance
- Program Documentation
|
| Prerequisites |
Students should have successfully completed Intellect Controls Group course I-100, Introduction to Ladder Logic and Control, or have a working knowledge of electromechanical control devices and relay ladder logic. |
| Length |
36 hours |
| CEU's |
3.3 |
| Objectives |
Persons successfully competing this course will be able to:
- Identify the components of Series 90-30 and 90-70 programmable controllers.
- Configure and install Series 90-30 and 90-70 programmable controller systems.
- Effectively use an IBM compatible terminal for programming and troubleshooting.
- Isolate processor and I/O faults to the module level.
- Write simple programs using the Relay and Basic Mnemonic instruction groups.
- Copy and load control programs.
- Use a printer to document programs and print reports.
|
| |
Click here to download this course description in a printable PDF.
You will need Adobe Acrobat Reader to view this file.
Download Adobe Acrobat Reader.
|
G-920: GE Fanuc Series 90 Family Programmable Controllers/Level Two
|
| Description |
This 32-hour training program provides a thorough hands-on familiarization with the advanced control and communications capabilities of the GE Fanuc Series 90-70 and 90-30 families of programmable controllers. Application exercises are used throughout the course to create a hands-on learning environment. |
| Topical Outline |
- Review of Series 90-70 and 90-30 Hardware
- Memory Organization and Structure
- Programming Terminal Software Operations
- Review of Relay, Timer/Counter, Conversion, Arithmetic and Comparison Instructions
- Data Move Functions
- Data Table Functions
- Bit Operation Functions
- I/O Interrupt Configuration and Operation
- Service Request Function
- Advanced Troubleshooting
- Overview of PID Control
|
| Prerequisites |
Students should have successfully completed Intellect Controls Group course G-910 (GE Fanuc Series 90 Family/Level One) or have knowledge equivalent to the course description. THIS IS NOT AN ENTRY LEVEL COURSE. |
| Length |
32 hours |
| CEU's |
3.0 |
| Objectives |
Persons successfully competing this course will be able to:
- Write control programs using all instruction groups (except PID).
- Effectively use an IBM compatible computer to program, edit and troubleshoot control programs using all instruction groups.
- Use the advanced diagnostic capabilities of 90-70 and 90-30 programmable controllers to aid in system troubleshooting.
- Utilize the Remote I/O and Genius Bus Controller communications capabilities of the 90-70 and 90-30 programmable controllers.
|
| |
Click here to download this course description in a printable PDF.
You will need Adobe Acrobat Reader to view this file.
Download Adobe Acrobat Reader.
|
M-910: Modicon 984/Quantum Family Programmable Controllers/Level One
|
| Description |
This 36-hour training program allows students to gain hands-on experience in the troubleshooting and maintenance of the Modicon 984 family of programmable controllers. Hardware and software troubleshooting are heavily emphasized throughout the training program. Troubleshooting techniques covered include interpretation of status indicators, diagnostic messages, error codes and use of the programming terminal to quickly isolate faults and take proper corrective actions. |
| Topical Outline |
- Introduction to Programmable Controllers
- 984 System Hardware and Troubleshooting
- Processor Configurations
- Traffic Cop
- Segment Scheduler (Overview)
- Installation
- Programming Terminal Operation
- Instruction Entry and Interpretation: Ladder Logic, Relays: NO, NC, Transitional, Timers: 1.0, 0.1, 0.01 sec., Counters: Up, Down, Math: 4-digit, Add, Subtract, Multiply, Divide & Data Transfer (Overview)
- Instruction Editing
- Program Searching
- Forcing Inputs and Outputs
- Troubleshooting: Status Indicators, Diagnostic Messages, Error Codes, I/O Modules and I/O Racks & Software
- Hands-On Troubleshooting Projects: Conveyers, Material Handling Robots, Batch Process Stations and Simulator Panels are used to give students hands-on experience solving typical problems encountered in the factory.
- Modbus and Modbus Plus
- Program Loading, Program Documentation and Printing
|
| Prerequisites |
Students should have successfully completed Intellect Controls Group course I-100, Introduction to Ladder Logic and Control, or have a working knowledge of electromechanical control devices and relay ladder logic. |
| Course Hardware |
Modicon 984 Models: 385, 485, Quantum |
| Length |
36 hours |
| CEU's |
3.3 |
| Objectives |
Persons successfully completing this course will be able to:
- Identify hardware components of a 984 programmable controller system.
- Distinguish the features and capabilities of the different 984 processors.
- Configure and install a 984 programmable controller system.
- Effectively use a programming terminal to isolate processor and I/O faults.
- Understand and troubleshoot control programs containing the ladder logic (Level One) instructions of the 984 programmable controller.
- Properly use peripheral devices to load programs and generate/print reports.
|
| |
Click here to download this course description in a printable PDF.
You will need Adobe Acrobat Reader to view this file.
Download Adobe Acrobat Reader.
|
M-920: Modicon 984/Quantum Family Programmable Controllers/Level Two
|
| Description |
This 32-hour training program provides a thorough hands-on familiarization with the advanced control and communications capabilities of the GE Fanuc Series 90-70 and 90-30 families of programmable controllers. Application exercises are used throughout the course to create a hands-on learning environment. |
| Topical Outline |
- Review of Series 90-70 and 90-30 Hardware
- Memory Organization and Structure
- Programming Terminal Software Operations
- Review of Relay, Timer/Counter, Conversion, Arithmetic and Comparison Instructions
- Data Move Functions
- Data Table Functions
- Bit Operation Functions
- I/O Interrupt Configuration and Operation
- Service Request Function
- Advanced Troubleshooting
- Overview of PID Control
|
| Prerequisites |
Students should have successfully completed Intellect Controls Group course G-910 (GE Fanuc Series 90 Family/Level One) or have knowledge equivalent to the course description. THIS IS NOT AN ENTRY LEVEL COURSE. |
| Length |
32 hours |
| CEU's |
3.0 |
| Objectives |
Persons successfully competing this course will be able to:
- Write control programs using all instruction groups (except PID).
- Effectively use an IBM compatible computer to program, edit and troubleshoot control programs using all instruction groups.
- Use the advanced diagnostic capabilities of 90-70 and 90-30 programmable controllers to aid in system troubleshooting.
- Utilize the Remote I/O and Genius Bus Controller communications capabilities of the 90-70 and 90-30 programmable controllers.
|
| |
Click here to download this course description in a printable PDF.
You will need Adobe Acrobat Reader to view this file.
Download Adobe Acrobat Reader.
|
|
|
|
|
|
